Fit the supplied support
bracket to the underside of the motherboard.
Outstanding must be up to reach the hole
of motherboard and the flat surface opposite.
Please remove any protective film or covers
before cooler installation.
Take the cooler and apply a small amount
of the thermal paste provided to the center
of the base of the heat-sink.
Once the CPU has been fitted gently
place the cooler onto the motherboard ensuring
that the fixing clip/screw holes align with
the support bracket.
Fit each of the clip/screws
to each post. Do not tighten them fully
until all have been tightened equally cross
Connect the fan connector onto the motherboard